-40%

F-133: STANDARD VALVE WITH 12MM-1.25 THREADS WITH LEVER CLIP

$ 13.7

Availability: 10002 in stock
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Brand: Fumoto
  • Country/Region of Manufacture: Japan
  • Modified Item: No
  • All returns accepted: Returns Accepted
  • Condition: New
  • Item must be returned within: 30 Days

    Description

    F-133: STANDARD VALVE WITH 12MM-1.25 THREADS WITH LEVER CLIP
    Our new Fumoto Standard Valves have a larger body with a 60% larger drain, allowing for faster oil changes compared to the smaller body models for the same thread size.
    Standard valves are for users who don’t need a hose connection, want to minimize a profile,  or have a drain port on the bottom of the oil pan.
    The Fumoto Engine Oil Drain's spring assisted ball valve replaces your standard issue oil drain plug and makes oil changes easier, cleaner, and less time consuming. Benefits of installing Fumoto valve include:
    One Touch Operation
    Clean and mess free oil changes
    Avoids contacting hot oil
    Eliminates stripped threads and frozen plugs
    Ideal for sampling analysis
    Incorporating Fumoto's most compact ball valve, Fumoto's F series valves are designed to fit cars, light trucks, vans, and select commercial engines. Constructed of forged brass and stainless steel to exacting Japanese specifications, F-series valves are designed to provide a lifetime of dependable and reliable service.
    Installation
    Remove original drain plug and drain oil into appropriate receptacle.
    Insert Engine Oil Drain Valve and gasket into drain plug port and tighten.
    Make sure valve is closed and refill crankcase.
    *A good rule of thumb is to install the valve by hand and then tighten an additional 1/8 - 1/4 turn with a wrench on the body.
    Do not over tighten.
    **
    Some oil pans are designed with a recessed drain hole which may prevent the valve from being installed properly.
    If the valve cannot be tightened all the way without hitting the oil pan wall, do not install the Drain Valve on your vehicle. Adapters are available for some models.
    Operation
    To open lift control lever and turn counter-clockwise 90 degrees.
    To close simply turn the lever clockwise 90 degrees until locked in original position.
    Safety
    Drive carefully at all times, and if you run over any foreign object on the road pull over and check the valve for any damage or leak. N-Series valve (with nipple to accept hose) is not recommended for passenger cars with low clearance.
    Lifetime Limited Warranty
    We offer a LIFETIME LIMITED WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto will replace the product at no charge. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States.
    Use our size chart to find your products, visit
    FUMOTO ONLINE STORE
    .
    For California Customers:
    WARNING
    Cancer and Reproductive Harm –
    www.P65Warnings.ca.gov